Keep on Running: A 1992 Toyota FJ80 Land Cruiser's Legacy

1992 Toyota FJ80 Land Cruiser (Photos by Garrett Hanska and Beatriz Craven)
Becoming an “automotive enthusiast” is different for everyone; some of us are enraptured by vehicles from movies or TV shows; others grow up around gearheads or fall in love wrenching on our first cars, desperate for the independence found within. For some of us, our first family cars flick the “this will be yours someday” switch—a powerful thing whether the vehicle is a classic 1967 Camaro, or in the case of this story, a humble 1990s Toyota SUV. 
JAN 05, 2019
There’s no price you can put on memories, hard work, and attachment when they all converge in one place.
Tweet this

Garrett Hanska, a mechanical engineering student at the University of Oklahoma, is one who’s experienced and kept alive the thrill of becoming a vehicle owner. Through an epic thread on the off-road enthusiast forum Expedition Portal, Hanska has been walking readers through the processes and challenges of modifying his 1992 Toyota Land Cruiser during his four years of ownership (stunning pictures from his many adventures can be found both on the forum and at his Instagram account (@garretthans-ka). Garrett’s FJ80 reminds us that often the best builds aren’t about spectacle but rather attention to detail, quality of execution, and a certain kind of irrational love.

Runs in the Family

Garrett’s father, Steve Hanska, was a Jeep fan from his college days in Colorado. In the late 1990s, he and his wife Deborah had moved to larger SUVs as they started a family—they picked up a 1988 Toyota FJ62 series Land Cruiser in 1999 and quickly fell in love. Within a year, Steve and Deborah went hunting for an FJ80 Land Cruiser, desiring the third row of seats it offered. They found a 1992 FJ80 series Land Cruiser on a dealer lot with 175,000 miles that wasn’t even for sale—soon the Hanksa’s were a full-on Toyota family. Steve appreciated the “over-engineered” quality of the Land Cruiser, sold a nearly-new ’99 Yukon, and started restoring FJ40s. Garrett was five years old when his parents bought the FJ80: over the years it ferried the Hanska boys to school and on yearly excursions into Colorado, fueling Garrett’s love for the outdoors and for off-roaders.

Garrett’s FJ80 reminds us that often the best builds aren’t about spectacle but rather attention to detail, quality of execution, and a certain kind of irrational love.
Tweet this

Garrett’s love for the ’92 made passing it down to him an easy decision: as his 16th birthday approached, the truck was spending most of its time in the Hanska family’s garage. Just before it officially became his, Garrett started modifying the FJ80 with some guidance from Steve. A 2-inch Ironman Nitro Gas lift with 1.25- inch spacers on the front to level the ride height went in first, along with 33×10.5×15 BFG KM1 tires on newly-painted wheels. The brush guard and running boards were pulled, the windows were tinted, and the bumpers and flares were painted with bedliner ahead of a Colorado run to test out the new additions.

From there, the build began in earnest. Garrett and Steve both wanted to repaint the Land Cruiser with a retro-theme, and Steve had just the thing on-hand—some Dune Beige paint from a previous FJ40 restoration. With limited time to get work done during breaks from school, Garrett credits his father’s advice and experience as invaluable. Steve’s attention to detail sharpened his focus and contributed to the quality of the FJ80. Sometimes, such as when Garrett was building a cooler basket and the pipe bender left dents in the metal, Steve would push him to smooth it out and do it right.

Taking Shape

One of the trickier aspects of the build has been modifying it to the many roles it plays. The FJ80 not only has to be a capable off-roader to reach the mountain sites where Garrett enjoys biking, but it also serves as his daily driver. Among the first mods was an idea Steve had years before, after having to pack the engine bay with snow to keep temperatures down during a run on Colorado’s Ophir Pass: hood vents from a Pontiac Grand Prix GTP and an electric pusher fan were installed in front of the radiator to keep the 3FE engine cool. Nitro 4.88 gears went in too, improving the 3FE’s performance at highway speeds and allowing for a later upgrade to 35×12.5r17 Kenda Klever Mud Terrain tires wrapped around 17-inch FJ Cruiser/4-Runner Trail Edition wheels.

Needed upgrades revealed themselves during ensuing trips. An injector leak in the 3FE gave Garrett a chance to install new Osidetiger 4-hole fuel injectors, helping fuel economy, throttle response, and smoothing out the engine at idle. While not a fan of snorkels, Garrett installed one to get more clean air into the 3FE. “It’s definitely paid off,” he says now, not only with the extra air but also after accidentally ending up in the Canadian River in Oklahoma in windshield-high water.

Garrett’s also done a large amount of fabrication for his Land Cruiser. Unable to find sliders that he liked, he turned out his own, along with a rack for his roof-mounted tent. He also built and installed a new center console last year, adding interior upgrades like 12-volt outlets in the third-row seating area, and a new head unit (with front and rear cameras) and speakers.

FJ80 Forever

We spoke to Garrett on the day his FJ80 hit 375,000 miles; he expects to pass 400,000 within the next 18 months. His father’s attention to maintenance means Garrett inherited his Land Cruiser with its original head gasket, transmission, and transfer case. The plan is to keep the FJ80 forever, replacing or modding pieces as needed. He’s pretty much done with aesthetics and is of two minds regarding installing a turbocharger: a part of him wants to continue upgrading and getting more power out of his rig; the other part wants to see how far his vehicle can go with just oil changes and general maintenance. In either case, he takes the FJ80 out whenever he can get away from studying.

Garrett’s perspective on life and the way he seems to have his priorities in order makes it easy to forget his age. He mentions a 2005 diagnosis of acute lymphocytic leukemia—or ALL, the most common childhood cancer according to the Mayo Clinic—in passing.

Thankfully, Garrett is healthy now, saying the experience gave him a “do what you love” attitude toward life. His advice for those looking to do their own builds is simple and undeniable: “Whatever you have doesn’t have to be crazy nice or fast, as long as at the end of the day you can get out and explore. Do your research.”

Besides a possible engine swap, if the ‘92’s 3FE finally gives out (a 1HD-T turbo diesel is an option), Garrett doesn’t have any new projects on the horizon.

When we asked if there was anything he wanted Tread enthusiasts to know about his Land Cruiser, the first thing he offered was a quick “It’s not for sale,” laughing about offers he’s received from all over the world. There’s no price you can put on memories, hard work, and attachment when they all converge in one place. As we said, it’s an irrational love.

1992 Toyota Land Cruiser

Engine type:
3fe 4.0l inline six


  • Ironman 4×4 performance series 50mm lift
  • Ironman 4×4 foam cell shocks, Ironman steering stabilizer
  • Custom 1 3/8 front coil spacers
  • Custom 1/2″ polyurethane body lift
  • Air lift 1000 kit in rear coils
  • 15mm Metaltech leveling spacer on driver’s rear coil
  • Washer mod castor correction
  • Sway bar drop brackets
  • Slee off-road extended brake lines
  • 35×12.5r17 kenda klever mud terrain tires
  • 2011-2014 FJ Cruiser/2010-2013 4runner trail edition wheels
  • Nitro gear and axle 4.88 ring and pinion (front and rear)


  • Ironman 4×4 deluxe bull bar
  • Custom-built rock sliders
  • Custom driver’s side tire swing out
  • Custom passenger side yeti 45 swing out
  • 12,000 lb. Badlands winch w/ arb 4×4 accessories
  • 48-inch hi-lift jack w/ custom dune beige handle
  • Hi-lift bull bar mounts
  • Custom receiver hitch, custom-built full length flat rack
  • Cvt mt. Bachelor roof top tent and annex
  • Custom wind fairing for roof top tent
  • Custom 8-foot awning
  • Custom york 210 on-board air compressor
  • 5-gallon air tank
  • Pontiac Grand Prix GTP hood vents
  • Aluminum radiator
  • Green hub fan clutch w/ 15k cst fluid
  • Osidetiger 4-hole fuel injectors
  • EGR delete
  • High clearance cat-back exhaust with single cat conversion
  • Snorkel
  • 40-inch led light bar on roof rack with custom mounts
  • Blue Sea contura 6-gang rocker switch panel
  • Daystar rocker switches
  • Custom rear storage box
  • Rear “attic” storage rack
  • Custom “tuffy style” center console
  • Northshore NSR-4 bike rack
  • Strong arm hatch struts
  • 12v outlet on console
  • Extended differential breathers
  • Custom driver’s seat extension brackets
Click below to read more articles like this on TREAD Magazine!